Gelcoat Repair Jacksonville
Your boat’s finish takes a beating on Jacksonville’s saltwater, and cracked or faded gelcoat only gets worse the longer it sits. Run & Gun brings professional gelcoat repair straight to your dock, slip, or ramp — no hauling, no shop wait. Whether you’re on the St. Johns River, the Intracoastal, or anywhere across Northeast Florida, we restore your hull’s finish fast and right.
Trusted Service You Can Rely On
At Run & Gun Boat Repair Jacksonville, we know how much the condition of your hull matters — both for resale value and pride of ownership. Our technicians have handled fiberglass and gelcoat repair on everything from center consoles to pontoons across Jacksonville and the surrounding waterways. If you want your boat looking sharp from bow to stern, you’re in the right place. We pair gelcoat repair with thorough boat maintenance to keep your vessel in top shape season after season, and we can also refresh the interior with boat upholstery repair while we’re on-site.
Why Choose Us?
- Our mechanics color-match gelcoat precisely so repairs blend seamlessly with your hull's original finish — no obvious patches.
- We work at your dock or marina, so your boat never has to leave the water for cosmetic or structural gelcoat work.
- From hairline stress cracks to deep gouges exposing the fiberglass laminate, we diagnose the root cause before we ever touch the repair.
- Every gelcoat repair is wet-sanded, buffed, and polished to a factory-level gloss before we pack up.
- Flexible scheduling — weekdays and weekends — means your repair fits your boating calendar, not ours.
Crack and Chip Repair
Hairline cracks and chips are the most common gelcoat complaint we see on Jacksonville boats, especially after a season of wake chop and dock bumps. Left untreated, even small cracks let water wick into the laminate and cause far costlier damage. We fill, fair, and finish each repair so it disappears into the surrounding surface.
Serving Jacksonville & Surrounding Areas
Run & Gun covers a wide stretch of Northeast Florida, reaching boaters wherever they keep their vessels. We regularly work in Orange Park, Fleming Island, and Green Cove Springs along the St. Johns River corridor, as well as coastal communities like Atlantic Beach, Neptune Beach, and Ponte Vedra Beach. We also serve Fernandina Beach to the north and St. Augustine to the south. Within Jacksonville, our technicians are familiar with the docks and marinas in Mandarin, Ortega, San Marco, Arlington, and Julington Creek, among other districts. If you're searching for boat gel coat repair near me and you're anywhere in this region, call (904) 512-2431 — we come to your dock.
Jacksonville Neighborhoods
Nearby Communities
Green Cove Springs
Common Signs You Need Service
Catching hull damage early is always cheaper than letting it develop — small gelcoat issues can quietly let water into the laminate and turn a minor repair into a major structural job.
Visible Cracks or Chips:
Hairline stress cracks around cleats, hatches, or the bow are a clear sign the gelcoat is failing. They allow water intrusion into the fiberglass laminate if left unaddressed.
Chalky or Faded Surface:
A dull, powdery hull surface means UV oxidation has broken down the gelcoat's protective layer. Restoration is still possible at this stage, but delay accelerates deterioration.
Blistering Below the Waterline:
Small bubbles or raised bumps on the hull bottom indicate osmotic blistering — water trapped inside the laminate. This requires prompt attention before delamination sets in.
Deep Scratches Showing White or Yellow:
If a scratch reveals a lighter layer beneath the color coat, it has cut through the gelcoat into the laminate. That exposed area needs sealing before your next time on the water.
Get a Free Gelcoat Repair Estimate
Run & Gun Boat Repair Jacksonville gives you a straight, honest assessment of what your hull needs — no upselling, no guesswork. Our experienced marine technicians inspect the damage, explain exactly what the repair involves, and give you a clear quote before any work begins. We handle everything from hairline cracks to full fiberglass and gelcoat repair, and we do it at your dock on a schedule that works for you.
Frequently Asked Questions
What does boat gel coat repair typically cost?
Cost depends on the size and depth of the damage. A small chip or crack repair can be straightforward and affordable, while structural repairs involving the fiberglass laminate take more material and labor. We provide a free on-site quote so you know the number before we start — no surprises.
Can you do fiberglass boat gelcoat repair at my dock, or do I need to haul the boat?
In most cases we can handle gelcoat repair right where your boat is moored. We bring all the tools, compounds, and color-matched materials to your location. Hauling is only necessary for below-waterline work that requires the boat to be out of the water for an extended dry time.
How do I know if my hull needs gelcoat restoration or a full respray?
If the surface is oxidized and dull but the gelcoat layer is still intact, boat gel coat restoration through compounding and polishing is usually enough. If the gelcoat is cracked through, deeply gouged, or missing in sections, a repair and refinish approach is needed. We'll assess your hull honestly and recommend only what's actually necessary.
How long does a gelcoat repair last?
A properly done repair — filled, faired, color-matched, and polished — can last many years with normal care. The key factors are the quality of the prep work and keeping the repaired area waxed and protected from UV. Jacksonville's sun is hard on all marine finishes, so an annual buff and wax goes a long way.
Do you handle cracked gel coat caused by a grounding or collision?
Yes. Impact damage often involves both the gelcoat and the underlying laminate, so we assess the full depth of the damage first. We repair the structural layer before finishing with matched gelcoat on top, ensuring the repair is sound — not just cosmetic.