Technician inspects boat upholstery cushion dockside with diagnostic tools visible in Jacksonville waterway setting.

Boat Upholstery Repair Jacksonville

When Jacksonville’s sun, salt air, and humidity take a toll on your boat’s interior, Run & Gun brings professional boat upholstery repair right to your dock, slip, or ramp — no hauling required. Whether your vinyl seats are cracking, your pontoon carpet is waterlogged, or your cushions have seen one too many seasons on the St. Johns River, we handle it all on-site. Call (904) 512-2431 — we come to your dock and get your cabin looking sharp again.

Trusted Service You Can Rely On

Run & Gun Boat Repair Jacksonville handles boat upholstery repair in-house, so there’s no middleman and no mystery markup — just skilled work done where your boat lives. From sun-faded vinyl on a center console to worn-out seating on a family pontoon, we assess the damage, source quality marine-grade materials, and restore your interior to a condition you’ll be proud of. If your hull needs attention at the same time, check out our gelcoat repair service, or ask about boat propeller repair while we’re on-site.

Why Choose Us?

  • Run & Gun performs boat upholstery repair in-house with marine-grade vinyl and UV-resistant thread rated for Florida's intense sun and salt exposure.
  • We work on pontoons, center consoles, bowriders, and bay boats — matching original stitch patterns and color so repairs blend seamlessly.
  • No trailer, no shop drop-off: our mobile setup brings cutting tools, sewing equipment, and adhesives directly to your slip or ramp.
  • Cracked seams, mildew-stained foam, and delaminating carpet are diagnosed on the spot so you get an honest repair plan before any work begins.
  • Scheduling is flexible around your launch days — weekend appointments available so your boat is ready before the weekend rush on the Intracoastal.
Fiberglass motorboat with outboard engine anchored in shallow Jacksonville marsh waters surrounded by cordgrass and palmettos.
Gray upholstered boat seat with chrome hardware detail at dockside in Jacksonville.

Vinyl Seat Repair & Replacement

Jacksonville's UV index is brutal, and vinyl boat seat repair is one of our most common calls — cracking, peeling, and seam separation happen faster here than in cooler climates. We patch minor cracks with color-matched marine vinyl filler or replace full seat panels when the damage is too widespread to patch cleanly. Either way, the finished surface is sealed against moisture and UV to extend its life. – Color-matched vinyl panel replacement – Double-stitched seams with UV-resistant thread – Foam core inspection and replacement if waterlogged

Serving Jacksonville & Surrounding Areas

Run & Gun serves boat owners across the Jacksonville metro and the surrounding region. We regularly travel to gelcoat repair jobs in Orange Park, Fleming Island, and Green Cove Springs along the St. Johns River corridor, as well as Atlantic Beach, Neptune Beach, and Ponte Vedra Beach on the Atlantic coast. Inland communities including Middleburg, Nocatee, and St. Augustine are also within our regular service range. Within Jacksonville itself, we cover Mandarin, Ortega, Beauclerc, Julington Creek, Arlington, San Marco, and the Isle of Palms area, among other neighborhoods. If you're not sure whether we reach your dock or ramp, call (904) 512-2431 — we come to your dock and will confirm coverage on the spot.

Common Signs You Need Service

Catching upholstery problems early prevents moisture from reaching the foam core and subfloor, where mold and rot become far more expensive to fix than a simple vinyl or carpet repair.

Cracking or Peeling Vinyl:

Surface cracks that expose the fabric backing underneath will let water into the foam core within a season, leading to mildew and structural foam failure. Address cracks before they reach the seams.

Persistent Mildew Odor:

A musty smell that doesn't clear after cleaning usually means moisture is trapped in the foam or carpet backing. This indicates the surface layer has already failed as a moisture barrier.

Delaminating or Bubbling Carpet:

Carpet lifting at the edges or bubbling in the middle signals adhesive failure and water intrusion beneath the deck surface. Left unaddressed, the subfloor can soften and rot.

Seam Separation or Loose Snaps:

Open seams on cushion covers allow water to pour directly into foam during rain or spray. Loose or broken snaps on pontoon cushions accelerate the same problem and are a quick fix before they worsen.

Get a Free Upholstery Repair Quote

Run & Gun handles every boat upholstery repair job from start to finish — no subcontractors, no surprise markups. Tell us your boat make, model, and what's damaged, and we'll put together a clear, itemized estimate so you know exactly what the work involves before we schedule. We carry marine-grade materials on the truck and work around your boating calendar, including weekends. Fill out the form and a member of our team will follow up promptly.


Frequently Asked Questions

How much does vinyl boat seat repair cost near me in Jacksonville?

The cost of vinyl boat seat repair depends on the size of the damaged area, whether the foam core needs replacement, and the complexity of the stitch pattern. Minor patch repairs are significantly less expensive than full panel replacement. Run & Gun provides itemized quotes before any work starts so there are no surprises.

Do you do pontoon seat cushion replacement on-site, or does the boat need to go to a shop?

We perform pontoon seat cushion replacement entirely on-site at your dock, slip, or ramp. Our mobile setup carries marine foam, vinyl, and sewing equipment, so there's no need to trailer your pontoon to a fixed shop. This saves you time and keeps your boat in the water.

Can you match the original color and stitch pattern for Sea Ray seat cushion replacement?

Yes — Sea Ray upholstery replacement is a service we've performed on multiple models. We source color-matched marine vinyl and replicate the factory pleat and stitch layout as closely as possible. For older models where the original vinyl is discontinued, we'll present the closest available alternatives before ordering material.

How long does pontoon carpet replacement take?

A full pontoon carpet replacement typically takes one to two days depending on deck size, the condition of the subfloor, and whether any surface prep or treatment is needed before the new carpet goes down. We'll give you a realistic timeline in the quote so you can plan around your next outing.

Is marine vinyl repair near me really worth it, or should I just replace the whole seat?

It depends on the extent of the damage. Small cracks or isolated seam failures are almost always worth repairing — the result is clean and the cost is a fraction of full replacement. If the foam has collapsed or the vinyl is cracking across the entire surface, full replacement delivers better long-term value. We'll give you an honest assessment of both options.